Instructions for Using the Remote-Controlled Grabber and Precautions
Release time:
2018-09-14
Instructions for Using the Remote-Controlled Grab: 1. Before using the grab, please ensure that both battery packs are fully charged. It is also advisable to keep them charged for backup. However, if the battery packs are stored with a full charge for three months, they must be recharged to extend their lifespan. 2. Place the battery pack into the grab's battery compartment and plug in the power connector. 3. Before starting to use, turn on the power switch and wait for 1 minute for the electronic control system to start functioning normally. 4. The grab will be automatically controlled by the system. To open the grab, please press any directional button on the remote control, and do not hold the button down for an extended period. 5. After completing the work, please turn off the power switch promptly. Precautions for Using the Remote-Controlled Grab: 1. If the device will not be used for an extended period, please remove the batteries. 2. In low or high-temperature environments, the battery capacity will decrease, and the continuous usage time will shorten. Please pay attention to insulation or heat dissipation during use. 3. After the sliding block is pressed against the upper beam, wait for about 8 seconds before performing the grabbing action. The wireless remote-controlled grab is a product developed by our company, suitable for single-hook cranes, and is an ideal tool for handling bulk materials such as mineral powder, coal, and gravel in operational environments like ports and bulk carriers. Its structure is reasonable, and the opening mechanism is innovative. Based on the structure of a single rope grab, it uses an effective remote control method to automatically open the empty grab in the air, allowing for unloading while suspended. The operation is convenient, and the actions are reliable and stable.
Instructions for using the remote-controlled grab bucket:
1. Before using the grab bucket, please ensure that both battery packs are fully charged. You can also keep them charged for backup, but if the battery packs are stored with a full charge for three months, they must be recharged to supplement the power to extend their lifespan.
2. Place the battery pack into the grab bucket's battery compartment and plug in the power plug.
3. Before starting to use, turn on the power switch and wait for 1 minute for the electronic control system to start working normally.
4. The grab bucket will be automatically controlled by the system. When you need to open the grab bucket, please press any directional key on the remote control, and do not press the key for an extended period.
5. After completing the work, please turn off the power switch in a timely manner.
Precautions for the remote-controlled grab bucket:
1. If the device is not used for a long time, please remove the batteries.
2. In low or high-temperature environments, the capacity of the battery will decrease, and the continuous usage time will shorten. Please pay attention to insulation or heat dissipation during use.
3. After the sliding block is pressed against the upper beam, wait for about 8 seconds before performing the grabbing action.
The wireless remote-controlled grab bucket is a product developed by our company, suitable for single-hook cranes, and is an ideal tool for handling bulk materials such as mineral powder, coal, and gravel in operations at ports and bulk carriers. Its structure is reasonable, and the opening mechanism is innovative. Based on the structure of a single rope grab bucket, it uses an effective remote control method to automatically open the empty box grab bucket in the air, achieving the unloading of the single rope grab bucket in the air. It is easy to operate and has reliable and stable actions.
Key words:
Previous Page
Next Page
Previous Page:
Next page:
Nantong Yukuang Machinery Equipment Co., Ltd.
Address: No.31, Huaxing Road, Jiuhua Town Industrial Park, Rugao City, Nantong City, Jiangsu Province
Telephone: 0086-513-85639998
Contact: Cao Yuli Tel: 0086-18662937010
Contact: Zhang Jie Tel: 0086-13815217243
E-mail: 965218109@qq.com
Access to related services
View mobile phone official website
Copyright©2025 Nantong Yukuang Machinery Equipment Co., Ltd. All Rights Reserved